advanced search

1970 442 Olds Blown Alcohol Pro Mod Racecar - $129,000

$129,000
Private Seller - wildbob
Great Falls, MT

Buyer Resources

Shipping

Compare shipping quotes and save up to 80%

Report This Ad

Item Details

Ad Number182649315
ConditionUsed

Updates From Seller

NOTE: MOTOR HAS A 4330M BILLET BRYANT CRANK SHAFT WITH HEMI CRANK BOLT FLANGE Above Added: Fri February 26, 2016, 10:59 am EST

Description

CAR:
1970 442 Olds Pro Mod
115 inch wheelbase
SFI 25.1E chromoly chassis- double frame rail. All components from Jerry Bickel Racecars Inc. Assembled by Rick Kent Racecars.
Chassis powder coated purple
Front end fiberglass body, aluminum wing, and carbon fiber inside the doors, wheel tubs, & seat.
Carbon wheel tubs. Rest of interior aluminum.
Carbon fiber seat
Strange carbon fiber rear brakes
Strange slotted steel front brakes
Dual master cylinder
Strange dual rear adjustable shocks
Strange front struts
Strange gun drilled 40 spline axles full floating
Strange Ultra center section
Custom 9" fabricated pro mod rear housing
Custom single wheelie bar
Racepak V300SD data recording system: Sensors, 8EGT, fuel pressure, boost pressure, driveshaft speed, rpm, g meter, vacuum
Gauges: Auto Meter tach, Auto Meter brake pressure gauge, Auto Meter oil pressure gauge, 2 MSD shift lights, oil temperature gauge
ISP complete surrounded head enclosure
ISP pour in seat and head pads
Car can accommodate 6'3" driver
Grant steering wheel
Monoqoc rear rims, 16 x 16
Weld Racing Alumastar V-series 2.0 front rims, 3.5
2 Stroud 10 lb FE-36 fire bottle system
Goodyear front runner tires, 24.0 x 5.0-15
Goodyear back tires, 34.5 x 17.0-16
2 Odyssey Extreme lightweight racing batteries
2 front aluminum puke tanks
TM custom 10 gal plastic fuel tank
Stroud safety dual air launch parachutes
Jerry Bickel custom driveshaft enclosure
Custom orange paint and stripes
Custom airbrushed front end, door handles, hood, rear bumper,side lights
Car weighs 2473 pounds without driver

MOTOR:
Motor: CN Billet Cross Bolt BBC 1041Y Series 526 Blown Alcohol
Priority main based oil system
Heads: Solid 14° Big Chief with 1/2" head studs with 40 hours of porting done to them; stainless steel head O rings
Copper head gaskets
Valve size: 2400 intake, 1900 exhaust
Deck height 10.2"
Big Chief Indy aluminum blower manifold ported and matched to heads, rubber O-ringed
2 custom Moroso Big Chief aluminum valve covers, powder-coated black
Tilton high-torque mini-starter
KB Olds oil pan pattern
Dailey Engineering 6-stage dry sump oil system
All 5 main caps are cross-bolted
60 mm cam
Stef's 13 qt dry sump tank
Stef's 6-stage oil pan
System 1 oil filter and components
All lightweight oil lines with crimped fittings and dated
DJ carbon fiber engine oil diaper restraint
GRP billet aluminum rods
Smith Bros. 1/2" push rods
COMP Cams roller lifters, size .904"
COMP Cams custom camshaft 60 mm
Custom T&D rocker assemblies. Aluminum intake rockers. Stainless steel exhaust rockers.
JE pistons, 12.5-to-1 compression
RCD billet cam cover with crank bearing support built into cover
RCD gear drive
RCD offset magnesium billet magneto drive
RCD billet pump extension
RCD billet belt adjuster
Fowler aluminum crank support

BLOWER AND FUEL SYSTEM:
Kobelco 14-71 K11 highly modified blower
DMPE 3 hole carbon fiber injector, Mark 7 long tube
DMPE custom injector spacer
RCD blower guard
8 mm GT magnesium blower pulleys, 25% overdrive
14 mm GT blower pulleys, 20% overdrive
Ram blower restraint and straps
Rage fuel pump and entire alcohol fuel system flowed by Oddy
Lightweight fuel lines

IGNITION:
Blueprinted BR Motorsports Black Magic MSD Pro Mag 44
MSD 44 amp point box
Coil is 44 amps
MSD 8.5 spark plug wires and boots

TRANSMISSION:
3-speed Lencodrive, Snyder Motorsports - new
10.5 Coan billet converter - new
CSR lightweight flexplate with ring gears - new
Bohr 6.3 titanium bellhousing - new
One 2.5 lb carbon fiber CO2 tank with Snyder Motorsports gauges - new
Taylor Motorsports 4.1 kevlar 3-speed blanket - new
Mark Williams 4" Accu-Bond 7075 aluminum driveshaft with 1480 U-joints - new
GForce Racecars chromoly driveshaft tunnel - new
Lenco reverse shifter, modified with neutral safety switch, from Snyder Motorsports - new
Snyder Motorsports aluminum evacuation tank in trunk for transmission - new

This car is a turnkey legal pro mod with only 11 test runs. It is like new, has the best of everything, runs wonderful, and is always a crowd favorite. The car hooks up and goes straight.

I hate to sell the car but have to due to health issues.

This car is only one of two that I have seen built at this level. The other car is Skinny Kid Race Cars out of Florida.

Included in this offer are all the spare parts for the car which are too numerous to mention.

In addition, we are selling SEPARATELY a 42-foot Cargo Express trailer with living quarters, professional awning, and pit mats. A tow rig is also available SEPARATELY, if interested.

Payment Details

TradesNot Accepted
Accepted Payment Methods Cash

Message Seller

Send Message

About The Seller

wildbob
Private Seller

Member Since May 2007

Great Falls, MT 59405

(406) 761-1810; (406) 878-5900

Learn More
0 Honor Payments
No Achievements Yet
Honor Member Bronze Seller Silver Seller Gold Seller Power Seller
Get Transportation Rates

Location

GREAT FALLS, MT
Similar Classifieds
Email us - Support@racingjunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy


Execution Stats: 0.286 sec / 8.4 MB used / 8.7 MB peak