Extremely nice 86 GN with Duttweiler Twin Turbo V8
Car was stripped to the metal and repainted. Car had zero rust or damage.
Car built by Duttweiler and has approximately 2000 miles since built and about 35 passes at 1/8 and 1/4 mile tracks, combined.
I have made only 3 passes on the car. The Torque Converter, has a stock stall and at idle car will drive.. My passes consisted of leaving at 2000 RPM with 5 lbs boost and ran 12 lbs boost during run. Car ran a 10.3 with a 1.9 60ft and 139.5 MPH. The car has too low a gear ratio (3.9) & with a short tire hit the computer rev limiter at 3/4 track. Top Speed at 7000 RPM is 139.5.
With a 3.4 or 3.3 Ratio car will run mid 9's on 12 LBS boost.
The lowest I can turn down the boost is 12 lbs using a knob on the center council.
Car has manual steering, manual brakes and stops easily from 139 MPH.
According to Dyno Sheet, 12 lbs boost is 802 HP and 702 lbs TQ at the crank.
Dyno Sheet says 17LBs boost makes 1035HP, 780 LBs TQ with HP still climbing.
Engine made 1450 HP on Duttweilers Dyno at Crank.I don't know the boost.
I have used the car primarily for car cruises this summer. Huge crowds wherever it parks. Car runs great on the street. Does not have heater, A/C or wipers.
I have build sheets, Dyno sheets, Motec instructions.
I believe it would cost twice my asking price to duplicate build at Duttweilers, you providing a car?
Duttweiler built 388 cubic inch V8
GM Bowtie block CNC
Compression Ratio 7.58
Scat Crank Forged
Oliver Billet Rods
Competition Cam Roller, 244/244 at .050
Steel Valves 1.6 INT, 2.08 EX.
Brodix Trac 1 Heads 66 CC Chambers
Duttweiler head work
T&D Rockers (shaft) Ratio 1.6 INT, 1.6 EXH
Hogan Sheet Metal Intake
GM Cast Aluminum V/C
MSD Ignition 6AL
2 T-66 BB on Center Turbos
Spearco Intercooler Core.
Aluminum Double Pass Radiator
8 point Chromoly Cage NHRA legal
New Bushings all around ( 2000 miles)
SFI Flex Plate
SFI Trans shield
SFI Flywheel shield
GNX Style Dash
Rev Limiter set 7100 RPM
Max Manifold pressure, 17Lbs = 1034 HP 780 Lbs Torque
Ford 9" 3.90 spool
Rear Coil overs, adjustable
BMR anti sway bar
Front Coil Overs adjustable for height.
T-400 manual shift.
Art Carr Converter, 9" stock stall approx. 1800 RPM
Painted 1 year ago and has yet to have final buff and wax.
Stock paint was completely stripped and zero rust.
I have extra painted trunk lid, front and rear bumpers, new
MSD boost control, new rugs still boxed.
I have the emblems.
New window felts installed.
Needs taller Gears.
Needs higher stall converter.
The Speedometer recently started acting eratic.
Accepted Open to partial trades most models. Prefer outright sale.
Paypal, Money Order, Cash
Posted: 09/16/2016, ad expires in 47 days
Seller Information Ad posted by: