SBC 350

Old 04-01-2013, 02:27 PM
  #11  
shopper
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 11
Default

The heads I took off of the motor was shaved to almost the spark plug holes but I don't have ant clue on the CC
shopper is offline  
Old 04-01-2013, 07:00 PM
  #12  
hotrod1994
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

take them to machine shop and have the cc volume checked but i think there way to low

64cc head should get ya 10:1 er so...

my world products 64's have plenty of room from the deck of the head to the plug hole
hotrod1994 is offline  
Old 04-02-2013, 06:09 AM
  #13  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

Kind of a SWAG but it sounds like somebody with a milling machine had a bad idea and made scrap out of those heads . .

But Hotrod's probably right. Go have them measured . .
roadkill2 is offline  
Old 04-02-2013, 12:49 PM
  #14  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

They could have been from a past 'case of beer' bench racing in a machine shop experiment :shock: 8) 8) :lol: :lol: ops: :roll:
TheYellaBrick is offline  
Old 04-02-2013, 06:45 PM
  #15  
hotrod1994
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

there had to be at least a case of beer in the man behind the cnc machine :shock:
hotrod1994 is offline  
Old 04-03-2013, 01:00 PM
  #16  
shopper
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 11
Default

Sounds good I will take them to a machine shop and see what CC they are, another question this is a roller motor and the #3 & #5 lifters are different than the rest they are rollers but instead of the bar assembly that connects at the top of the two lifters these have like a middle brace between the two lifters and with springs in them, I'm scratching my head on this.
shopper is offline  
Old 04-03-2013, 01:30 PM
  #17  
hotrod1994
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

hmmm idk why that would be it seem as if the guy just threw this thing together with spare parts
hotrod1994 is offline  
Old 04-03-2013, 02:15 PM
  #18  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

Originally Posted by hotrod1994
hmmm idk why that would be it seem as if the guy just threw this thing together with spare parts
X2 . . . . . A "Handy Grenade" . . Whatever he had handy, he built a grenade out of. . .
roadkill2 is offline  
Old 04-03-2013, 03:25 PM
  #19  
shopper
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 11
Default

Got me thinking the same thing
shopper is offline  
Old 04-03-2013, 03:29 PM
  #20  
shopper
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 11
Default

I really appreciate all you guys input on this motor it sure has help me make a decision
shopper is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service