RECOMMEND A HEAD FOR A 434 SBC 15 OR 18 DEGREE HEAD

Old 10-28-2012, 05:24 PM
  #11  
bowler
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Apr 2006
Posts: 103
Default 18c

wow that's what my car runs but at 2440#! i checked T&D web site and my rockers are the wrong offset for the 18c, i saw a set on ebay will check to see if they have shaft rockers, Zip i do have to change pistons, on brodix web they show a dyno comparing a ported t1 and a ported sts18x and it was about 100 hp better!
bowler is offline  
Old 10-30-2012, 06:11 PM
  #12  
bowler
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Apr 2006
Posts: 103
Default GM 18 degree

Zip a guy has a set of GM #363 18 degree heads with T&D shaft rockers he wants to trade for my 23 degree heads, are they any good? thanks Doug
bowler is offline  
Old 11-04-2012, 03:22 AM
  #13  
lodilobo
Member
MASTER JOURNEYMAN
 
Join Date: Sep 2007
Posts: 38
Default

Check CFE racing products....they have 18, 15, 12 and 10 degree heads. Check the flow #'s. I'm using a set of the 18 degree heads, and they work well.
lodilobo is offline  
Old 11-04-2012, 02:20 PM
  #14  
bowler
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Apr 2006
Posts: 103
Default CFE

Wow I never looked at CFE but they are very nice heads that do flow, thanks for the info. Doug
bowler is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service