Tranny Feedback
#21
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Originally Posted by lively
SWEEEEEEET-- I LIKE GOOD FABRICATION !! :lol:
PICTURES FOR SURE 8)
PICTURES FOR SURE 8)
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#26
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Originally Posted by harbone66
Did you have to hammer on the trans hump anywhere to make room for the new tranny?
It had to be masssged a little but no,beating,bangin or major cutting.I did run in
Problems where my exhaust at the crossover section.. I also got problems with my igniy. Switch turming all the way back. it turns back just far enough to kill power bjt needs ankotger half turn backward to be right. ANY IDEAS? how to fix f
This ?
#27
I think there are "ears" on the back of the cylinder that engage the ignition switch. It probably broke one of them off or the plastic piece on the switch itself is broken.
__________________
Chris
As close to "Normal" as I can get...
Chris
As close to "Normal" as I can get...