Bbc hp est
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Nov 2007
Location: indiana
Posts: 123
Bbc hp est
454 .040 over kb hyp pistons 11:1 Chevy 781 heads 2.19 in 1.72 ex bowls blended 629 lift solid flat tappet cam eagle forged crank stock rods all balanced Holley single plane intake and a demon 850
#3
Senior Member
SENIOR BUILDER
Join Date: Dec 2005
Posts: 117
Re: Bbc hp est
Originally Posted by ejm
454 .040 over kb hyp pistons 11:1 Chevy 781 heads 2.19 in 1.72 ex bowls blended 629 lift solid flat tappet cam eagle forged crank stock rods all balanced Holley single plane intake and a demon 850
#5
bbc hp estimate
I had a similar (but a stroker) set up, slightly less cam (both lift and duration), 489 inches
(4.25 stroke .030)with a 1050 dominator made 578 hp with a very nice flat torgue curve. It was a roller cam and rect port GM heads, and 10.4 to 1 compression.
good luck !
My guess is 540 ish
(4.25 stroke .030)with a 1050 dominator made 578 hp with a very nice flat torgue curve. It was a roller cam and rect port GM heads, and 10.4 to 1 compression.
good luck !
My guess is 540 ish
#6
Senior Member
RACING JUNKIE
Join Date: Jan 2012
Posts: 628
It don't matter! You really don't care . .
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
#7
Senior Member
SENIOR BUILDER
Join Date: Dec 2005
Posts: 117
Originally Posted by roadkill2
It don't matter! You really don't care . .
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
#8
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Originally Posted by maxpower671
Originally Posted by roadkill2
It don't matter! You really don't care . .
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
"Horsepower" is one of two things. A measurement determined by testing the actual output with a Dynometer, or a term used at the Bar when trying to impress people who don't know any better . .
If you're a racer (or engine Builder) and build an engine for a specific purpose (Like Quarter Mile Drag racing, for lack of a better one) then ET is (or should be) your primary concern.
Doesn't matter whether you're racing heads up or Brackets, it's ET or the potential to get to that ET that you're concerned with . .
And, based upon both experience of yourself, or those who are relatively successful at the type of racing you're doing, ascertaining the build and it's potential results should be, literally, empirical . . .
The "Fine Tuning" for good results and engine longevity belong to the user . . . and still have little to do with the spoken word "Horsepower" . . .
Jus' sayin'
#9
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Nov 2007
Location: indiana
Posts: 123
Well it's not a drag motor and will never be consistant, its in a pulling truck and every track is different and the sled can be weighted differently as can the gearing it the weight box. So i was just asking to have a clue where i stand withe the other 600-625hp trucks out there. Sorry if this thread bothers some of you.