alldeck BBC Pushrod problem

Old 11-15-2015, 05:19 AM
  #1  
wlpatterson
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Mar 2003
Posts: 287
Default alldeck BBC Pushrod problem

Im building a BBC Talldeck And am having a hell of a time finding the right pushrod.I called Comcams and the Pushrods I have are .020 shorted than stock talldeck length but the tech says that's good.Im running a comp 282 Hyd cam setup and when I went to install the pushrods the Rockers will not reach the pushrod? Im running Brandnew Procomp Alum Heads And these are Edelbrock Pushrods.Is it a lifter problem? I know someone out there has had this problem before and I would really appreciate your help..you can Text me at 361-548-3327 or email me at [email protected] & thanx in advance.I don't know if it makes any difference but I decked the block .010 but to me that should make the pushrod .010 longer?
wlpatterson is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -