video of car bouncing for the first 100 ft
#1
Member
CRAFTSMAN
Thread Starter
Join Date: Jan 2008
Location: racine wisconsin
Posts: 50
video of car bouncing for the first 100 ft
http://www.youtube.com/watch?v=IyLRzEutk6g what causes this are my shocks set to loose? its a tube chassis ladder bar car with double adjustables afco in rear. the front end has single adjustables with frontend limiters set with about 1/2" of travel. any input guys? thanks mike
#5
Member
CRAFTSMAN
Thread Starter
Join Date: Jan 2008
Location: racine wisconsin
Posts: 50
compresion= #3 on the knob
rebound= 4 spins on the shaft
front coil overs???? the limiters have 1/2'' of travel
car weighs 2580 with driver. car is a small block car with a glide. 4.86 gear. leaving @ 4400 and shifting at 7000
rebound= 4 spins on the shaft
front coil overs???? the limiters have 1/2'' of travel
car weighs 2580 with driver. car is a small block car with a glide. 4.86 gear. leaving @ 4400 and shifting at 7000
#6
Senior Member
RACING JUNKIE
Join Date: Dec 2007
Location: ohio
Posts: 816
don,t know how many clicks your shock have, but i would go half on compression, and two over half on rebound, and watch the 60, either taking more hit out, or put more in. maybe me but i like a little more frontend travel than that, i am better able to control for the lack of a better word, snap rotation, in other words the frontend comes up too fast, and the tires brake traction. i would try the shock adjustments first, then look at the frontend thing. good luck been there