Manley Aluminum rod torque
#1
Member
JOURNEYMAN
Thread Starter
Join Date: May 2004
Location: Letellier MB, Canada
Posts: 31
Manley Aluminum rod torque
I purchased a 468 with 10 year old Manley aluminum rods. The rods only have 20 passes on them. I'm going through the motor and can't find torque specs for the rods. They have 7/16 ARP 12 point bolts. Can someone help me with torque specs for these rods? Thanks...Jeff.
#4
Senior Member
MASTER BUILDER
Join Date: Jan 2008
Posts: 146
tightening rods down to a ft lb, should be good enough-- rod stretch or not
use plasti gauge to measure the correct gap
even if they are a lil stretched the torq shouldn't be affected, always measure properly,and your ride will keep on running
use plasti gauge to measure the correct gap
even if they are a lil stretched the torq shouldn't be affected, always measure properly,and your ride will keep on running