hoosier quick time pros

Old 06-23-2007, 06:13 AM
  #1  
spib
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default hoosier quick time pros

I am running hoosier quick time pros, was told 12-14lbs is a good starting point, does anyone have this slick and what do you run, also what do they need as far as getting them ready in the waterbox, I have 29x14.5 thanks mark
spib is offline  
Old 06-23-2007, 07:26 AM
  #2  
chevguy65
Senior Member
RACING JUNKIE
 
Join Date: Sep 2005
Location: ID
Posts: 1,125
Default

Mark, I am not to sure about Hoosiers, but I would run a min of 17-20 to start and adjust from there, you do not want to start with tire pressure to low.

As far as the water box, let the tech guide you in and pull you out.

You need to back into the water far enough to coat the tires and then pull out to dry pavement to start your burnout.

just my .02
chevguy65 is offline  
Old 06-23-2007, 07:33 AM
  #3  
topsportsman1
Administrator
RACING JUNKIE
 
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,208
Default

I ran a set of these on my car a couple years ago 33x22.50x15 Big tires

I had 7 lbs in the tires cold.I had 1.12 60' times with these tires,but my car was 2475 lbs fully loaded with me in it.
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
topsportsman1 is offline  
Old 06-23-2007, 07:43 AM
  #4  
spib
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default

I was told by hoosier start at 12-14lbs and go from there, was wondering how much they needed to get sticky, I dont want to treat them like my bf goodrich dot slicks, half gone in one race, but got good pics that race in box SMOKE SHOW in the shit box chevy, thats what my friend called my big old long bed truck
spib is offline  
Old 06-24-2007, 04:16 PM
  #5  
margaritaman
Member
JUNIOR BUILDER
 
Join Date: Nov 2004
Location: Home of Bill and Ted
Posts: 92
Default

12 on the street and 8 cold on the track

31 x 18.5
margaritaman is offline  
Old 06-25-2007, 07:34 AM
  #6  
3dracing
Senior Member
MASTER BUILDER
 
Join Date: Mar 2003
Location: Dothan Al.
Posts: 166
Default

Kinda heavy isn't it Tom? Ha Ha.


Steve
3dracing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service