monte carlo rotors on mustang spindles

Reply Subscribe

Thread Tools

08-04-2009, 11:57 AM

brett46

Junior Member

APPRENTICE

Thread Starter

Join Date: Jul 2009

Location: Farmington,Illinois

Posts: 24

monte carlo rotors on mustang spindles

gotta question on brakes, will gm( monte or s10) brake rotors fit on mustang spindles? I am getting a straight axle kit from speedway and it comes with mustang spindles. There are a set of aerospace brakes and rotors off a monte in the classifieds trying to get a package deal on all this guys parts.

Thanks guys / Sorry I was staring at the red light,put this in the wrong section. :roll:

08-05-2009, 06:06 PM

brett46

Junior Member

APPRENTICE

Thread Starter

Join Date: Jul 2009

Location: Farmington,Illinois

Posts: 24

Ok updated info they are not mustang spindles (IDIOT) they are chevy spindles 49-54, now does anyone know if the S10 rotors will work on these spindles?

08-05-2009, 06:27 PM

FullTimeRacing

Senior Member

DYNO OPERATOR

Join Date: Mar 2008

Location: New Orleans,La

Posts: 515

with some time and a bering shop(I have ABS bering here in the N.O.)you could get the inside and outside diameters.

08-05-2009, 07:03 PM

mytmouz

Senior Member

RACING JUNKIE

Join Date: May 2006

Location: Pelahatchie, MS

Posts: 1,005

http://www.speedwaymotors.com/Speedw...dles,2013.html

08-06-2009, 06:06 PM

brett46

Junior Member

APPRENTICE

Thread Starter

Join Date: Jul 2009

Location: Farmington,Illinois

Posts: 24

Ok I finally found out that the later hubs will not fit the 41-54 spindles so I will just have to get the complete gasser axle kit from speedway w/wilwood brakes dam this project is getting pricer by the day.