P/G Shift Lever ?
05-22-2010, 02:29 PM
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
P/G Shift Lever ?
POWER/Glide ???
I have a Main Frame rail that runs with/in a 1/4 of the Trans pan,so my Question is?
Can I Flip the Shift Lever over and use it in the Up Position,instead of Down?Seems like i had to do this once before but,My memory is getting Old like me?
Anything that I will Need to do other than remove the Pan and take the Nut off that holds the lever inplace?
THANKS!
G 8)
I have a Main Frame rail that runs with/in a 1/4 of the Trans pan,so my Question is?
Can I Flip the Shift Lever over and use it in the Up Position,instead of Down?Seems like i had to do this once before but,My memory is getting Old like me?
Anything that I will Need to do other than remove the Pan and take the Nut off that holds the lever inplace?
THANKS!
G 8)
09-22-2010, 08:21 PM
#4
Junior Member
SHOW GUEST
Join Date: Dec 2007
Posts: 1
Yes you can flip the shift lever to the "up" position only if you will be pushing it select your gears. When its down in the normal position youre pulling it select your gears. If you flip it up make sure your lever doesnt touch your band adjustment screw.
