need your opion?

Thread Tools
 
Old 11-16-2008, 09:32 AM
  #11  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

I went to a Rons Terminator but I still have a Superflow pump that works great. Superflow were bought out buy Magnaflow then changed to Magnafuel. But all three pumps are built on the same design, they work great and last a long time. I also have two BG 400s that worked great but after a couple of years running started to leak out of the weep hole.
dparker is offline  
Old 11-17-2008, 12:58 PM
  #12  
roger61670
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2005
Posts: 12
Default need your opion

I put two gauges on 1-pump/ 1 at fuel rail. The pump only has 20 psi. and I adjusted the reg. to 6 psi. I sent a e-mail to BARRY GRANT , to see if they would buy there part's back, still waiting for a reply :twisted:
roger61670 is offline  
Old 11-17-2008, 01:49 PM
  #13  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: need your opion

Originally Posted by roger61670
I put two gauges on 1-pump/ 1 at fuel rail. The pump only has 20 psi. and I adjusted the reg. to 6 psi. I sent a e-mail to BARRY GRANT , to see if they would buy there part's back, still waiting for a reply :twisted:

You'll be waiting a lifetime for a reply ..
hammertime is offline  
Old 11-17-2008, 04:21 PM
  #14  
radicalz
Senior Member
MASTER BUILDER
 
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Default Re: need your opion

Originally Posted by roger61670
I put two gauges on 1-pump/ 1 at fuel rail. The pump only has 20 psi. and I adjusted the reg. to 6 psi. I sent a e-mail to BARRY GRANT , to see if they would buy there part's back, still waiting for a reply :twisted:

Roger just make sure you have 6.5-7psi on the fuel rail going to the carb set the floats and should b all set..... :wink: :wink: :wink:
radicalz is offline  
Old 11-21-2008, 09:33 PM
  #15  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

get rid of liquid gages!!! they are problematic!!!i think that is a word lol...but seriously dont run them. also get the best regulator you can afford and if anyone here doesnt agree with me call aeromotive magnafuel etc... and ask how much their regulators can hold back,youll find magnafuel is probably highest.atleast they were when i did research about 18 months ago
russ67chevelle is offline  
Old 11-25-2008, 06:41 PM
  #16  
roger61670
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2005
Posts: 12
Default

thanks for everybody's advise
roger61670 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -