Anyone tried Drag Bags by Airlift??

Old 02-02-2010, 09:48 AM
  #1  
MillerTime12
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Oct 2008
Posts: 16
Default Anyone tried Drag Bags by Airlift??

We recently addded a pair of Drag Bags to the rear of our '89 camaro, along with subframe connectors. Im trying to get some sugestions on what psi i should try. The instructions say 5 psi in the left and a range between 10-35 psi. on the right. any suggestions :?: :?: The car is 3000 lbs with a 355. foot braked. im trying to keep the car from pulling right along with lowwering my 60ft. time
MillerTime12 is offline  
Old 02-04-2010, 03:34 PM
  #2  
wmeabates
Senior Member
MASTER BUILDER
 
Join Date: Sep 2005
Posts: 134
Default

I have an 83 foot brake Camaro that was going right leaving.The right air bag will help,I would leave the left one out,the torque arm will load the left side.The round spring rubbers like nascar uses will also help,I had two full rubbers in the right side.If You have adj.shocks add compression dampening to the right and add rebound to the left.I ended using a front spring cut and shaped to fit in the right rear.Be carefull with the air in the right air bag,to much will cause the left front to dive if you have to brake hard.Bill.
wmeabates is offline  
Old 02-05-2010, 09:50 AM
  #3  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

I started with 11lbs on right side,car jumped to the left when i left.Iwent down to 8lbs and it is now fine.
JEFF69Z28 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -