dragster body
#4
Member
JOURNEYMAN
Join Date: Oct 2004
Location: arizona
Posts: 32
If it's fiberglass, attachment points should be minimal.Take a look at a M&M car with the Reageal fiberglass body. They mount the body down from the shoulder hoop and once on each side of the front. Some guy's then tie them together under the bottom rails of the car not attatching to the chassis. The body needs to flex independantly of the chassis, or you will crack it up
Look at M&M Racecar website
Thanks
Mike
Look at M&M Racecar website
Thanks
Mike
#5
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
A lot of the times there is only 6 in one peice deals along the bottom, like mentoined above there is usually a floating tab with a bar across to the other side that sits there letting it flex and move a bit on a few of them.