finished my buddies sbc!
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
finished my buddies sbc!
ok so weve been workin on this 350 sbc .060 over for about 5 months now and we're finally done
its got a scat all forged rotating assembly, forged flat tops, and afr alluminum heads 210 cc runner and 205int and 160exh valves, harland sharp 1.5 rockers and a lunati 525int and 540exh cam, air gap manifold and 750 carb
hes wantin a few guesses on power, i said close to 525 give or take
what do yall think?
its got a scat all forged rotating assembly, forged flat tops, and afr alluminum heads 210 cc runner and 205int and 160exh valves, harland sharp 1.5 rockers and a lunati 525int and 540exh cam, air gap manifold and 750 carb
hes wantin a few guesses on power, i said close to 525 give or take
what do yall think?
#3
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Re: finished my buddies sbc!
Originally Posted by bowhay
hes wantin a few guesses on power, i said close to 525 give or take
what do yall think?
what do yall think?
That things good for at least 600...maybe 625.
#6
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Re: finished my buddies sbc!
Originally Posted by Tod74
Originally Posted by bowhay
hes wantin a few guesses on power, i said close to 525 give or take
what do yall think?
what do yall think?
That things good for at least 600...maybe 625.
Dammit! :shock:
#8
Senior Member
EXPERT BUILDER
Join Date: Jan 2005
Posts: 336
u need to tell more info on cam(solid or hydraulic then roller or flattappet)
also what is compression ratio?
off top of my head ill guess 450 would be doing pretty well if 10:1 compression hydraulic flat tappet....tell us more!!!
by the way the intake is fine unless u regularly take er up to 7000 rpms or higher
also what is compression ratio?
off top of my head ill guess 450 would be doing pretty well if 10:1 compression hydraulic flat tappet....tell us more!!!
by the way the intake is fine unless u regularly take er up to 7000 rpms or higher