Lifter bore problem
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Oct 2003
Posts: 144
Lifter bore problem
I need to find out how much lifter bore clearance is acceptable. I had some issues with low oil pressure in a race engine of mine and one of the lifters got a bit stuck in the lifter hole. I had to use a pry bar to remove it and it looked scorched.
I dont want to throw the block away but may have to.
any easy fix for these?
Al
I dont want to throw the block away but may have to.
any easy fix for these?
Al
#2
Senior Member
EXPERT BUILDER
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Re: Lifter bore problem
Originally Posted by altune
I need to find out how much lifter bore clearance is acceptable. I had some issues with low oil pressure in a race engine of mine and one of the lifters got a bit stuck in the lifter hole. I had to use a pry bar to remove it and it looked scorched.
I dont want to throw the block away but may have to.
any easy fix for these?
Al
I dont want to throw the block away but may have to.
any easy fix for these?
Al
#4
Senior Member
EXPERT BUILDER
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Originally Posted by altune
block is sbc 509 casting.
lifters are solid roller, crower I think.
Al
lifters are solid roller, crower I think.
Al