bbc main bearing clearance with aluminum block????????

Old 10-09-2007, 09:38 AM
  #1  
badbug3
Member
JUNIOR BUILDER
Thread Starter
 
Join Date: Jan 2004
Posts: 77
Default bbc main bearing clearance with aluminum block????????

On an aluminum block with billet steel splayed main caps, does the main bearing bores get tighter or looser when heated up to operating temperature ? Would you just shoot for the same clearances as on an iron block?

Therefore, what main bearing clearance is desired?
Application being drag race, recreational marine use, fresh water , cold block temps of 100-130 degrees operating temperature.
Also being turbocharged. thanks
badbug3 is offline  
Old 10-09-2007, 05:45 PM
  #2  
superstreeter
Senior Member
SENIOR BUILDER
 
Join Date: Sep 2007
Location: Div VI
Posts: 122
Default

I put a beast like that together last year,,,what a headache,,I set all the clearances the way you would a steel block,,,but everything expands more than the steel block,,You will probably find when you fire it up that your oil pressure really drops when it gets warm,,also had problems honing the mains (alum/steel) more problems for sure than steel! but once you get past that, you`ll probably like it.any other questions, just let them rip!
superstreeter is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -