rpm help
11-26-2011, 07:01 PM
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
rpm help
what kind of rpm's will i turn through the taps with the set up im looking to go with
76 camaro about 3400 lbs with driver
mild sbc with STOCK bottom end mild cam 477/477 lift and268/268 durration
1.94/1.5 heads milled for 9.3:1
th350
3200 stall
4.88 gears (open to suggestions for best results) but looking to stay higher to get off line decent
29x12.5 mt sportsmans
stock bottom end 350 with mild set up just looking for what the rpm's will be at the end of the 1/4 mile im willing to push this thing to the absolute limit but will 4.88's be to much i can get a set cheap
(BUY IT,BUILD IT,BREAK IT, AND REPEAT)
76 camaro about 3400 lbs with driver
mild sbc with STOCK bottom end mild cam 477/477 lift and268/268 durration
1.94/1.5 heads milled for 9.3:1
th350
3200 stall
4.88 gears (open to suggestions for best results) but looking to stay higher to get off line decent
29x12.5 mt sportsmans
stock bottom end 350 with mild set up just looking for what the rpm's will be at the end of the 1/4 mile im willing to push this thing to the absolute limit but will 4.88's be to much i can get a set cheap
(BUY IT,BUILD IT,BREAK IT, AND REPEAT)
11-26-2011, 07:30 PM
#2
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
I had a stock 350 with a 470 lift cam
turbo 350 3600 b&m convertor
4:86 gears went through the finish at 5800
on a 29 tall slick
no I dont think the 4:88 would be to low
I would quess your rpms will be 5700-6300
turbo 350 3600 b&m convertor
4:86 gears went through the finish at 5800
on a 29 tall slick
no I dont think the 4:88 would be to low
I would quess your rpms will be 5700-6300
11-27-2011, 07:15 PM
#4
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Originally Posted by mrbigtrucks
what would she run in the 1/4
