need advice quick
#21
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Originally Posted by dragonmaster093
im no expert but been around all forms of racing long enough to know 10 and 12 bolts dont stand up to real power. and know that the next logical steps are dana 60" and top dog 9 inch so my personal opinion is you just wasted money and parts that safety officails are gonna be picking up off the track
I believe a good 12 bolt will take quite a bit of power if it is built for it. Maybe not in a car like BJUICES but for anything BOWHAY is going to throw at it it will be fine...my car has a 12 bolt with Strange spool axles etc behind a 540. .....(Watch, now that I opened my yap it will explode first time out this spring :? ).
#22
Senior Member
RACING JUNKIE
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
but are you running power adders tod? seen some 12's let go when nos is used. im a chevy guy (bow ties runnng in veins) but also know where chevys weakness"s are and i hope you have no issuses
#23
Senior Member
RACING JUNKIE
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
also based on what ive read unless i read wrong yours is "built" where as one in qusetion just has axle up grade. didnt see anything about c-clip eliminators so thats also what my opinion is also going off
#24
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
im pretty sure im not gonna be breakin my rear with a 450 horse 383
it has rishmond gears, auburn posi and moser axles
i know there is better stuff out there but this is how i did it
and yea i know the truck is heavy but i love it lol
it has rishmond gears, auburn posi and moser axles
i know there is better stuff out there but this is how i did it
and yea i know the truck is heavy but i love it lol
#25
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
REAR
Tod,Think about this???
If you were going to REPLACE a 10 bolt?
Would you put in a 12 Bolt?I SURE HOPE NOT!!!
I KNOW I would NOT!Thats the POINT i'm trying to get accross?
But,Then again............?
Later
G 8)
If you were going to REPLACE a 10 bolt?
Would you put in a 12 Bolt?I SURE HOPE NOT!!!
I KNOW I would NOT!Thats the POINT i'm trying to get accross?
But,Then again............?
Later
G 8)
#28
Senior Member
RACING JUNKIE
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,391
Or maybe.... you change the stall speed, spray a little later, go w/a Dana 60 if you want to keep the family the same... I don't know, my Dana 60 is still together. Here's the thing- you have a long base p/u & spraying on the launch seems hard on the rear & hard to hook up @ the same time. You can only ask so much of a basically stock suspension p/u. I am certainly no expert, but it seems there is another way of improving your launch.