trans safety

Old 06-12-2007, 08:11 AM
  #1  
spib
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default trans safety

need a flex plate shield and a tranny sheild or blanket for turbo 350, do any of you have suggestions to as brands, space is tight in s10 , but must get these two things to be legal, any good ideas
spib is offline  
Old 06-12-2007, 09:43 AM
  #2  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Default

We use tha CSR fiber shield it's all in one and fits really close.

http://www.jegs.com/webapp/wcs/store...10002_44680_-1

Curtis
curtisreed is offline  
Old 06-12-2007, 12:42 PM
  #3  
spib
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default

http://store.summitracing.com/partde...5&autoview=sku just ordered this flexplate shield, hopefully will fit in there, will get a blanket from tci and will be done
spib is offline  
Old 06-19-2007, 09:12 PM
  #4  
sc3314
Member
JUNIOR BUILDER
 
Join Date: Jan 2004
Location: Wisconsin
Posts: 65
Default

By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
sc3314 is offline  
Old 06-20-2007, 09:28 AM
  #5  
sp2816
Senior Member
MASTER BUILDER
 
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
Default

drz1972ss wrote:
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
The JW ultrabell is for protection of the flexplate area, but it still requires the blanket or transmission shield for the planetaries.


Bill M
sp2816 is offline  
Old 06-24-2007, 05:27 AM
  #6  
sc3314
Member
JUNIOR BUILDER
 
Join Date: Jan 2004
Location: Wisconsin
Posts: 65
Default

SFI spec 4.1 for cars running 10.99 and faster SFI spec 30.1 for 9.99 and faster. If your running any slower, no flexplate shield or blanket required.
sc3314 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -