302 build....
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Jun 2009
Location: New Richmond, WI.
Posts: 87
![Default](images/icons/icon1.gif)
First time buildin a ford, and have a stock block and heads out a 86 mustand. On a budget build and just lookin for mild street use. lookin for ideas on gettin the best bang for my buck. (decided to go carberator on it too) thanks
nick
nick
#5
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
![Default](images/icons/icon1.gif)
Originally Posted by OneBadGMC
Rebuild it stock and throw a vortech or procharger on it.
There's your best bang for the buck.
There's your best bang for the buck.
Slap a plate system on it, or better yet, a plate and a fogger system......
Now that's the most bang for your buck!
Cp
#7
![Default](images/icons/icon1.gif)
Originally Posted by ashbros
x 2 year and models make all the difference, I have to admit, I once to was a ford guy, LOL
ops:
![Embarrassment](images/smilies/redface.gif)
#8
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
![Default](images/icons/icon1.gif)
I'd race a ford, only if it had a chevy motor in it :shock:
All kidding aside, you got a killer platform, 85 and up SBF's were roller cam blocks, so I'd definetly stay with a roller cam, but up the lift and duration a bit.
Ford Performance Parts # b303 is the cam alot of ford guys are running.
Roller rockers would be my next recommend along with some full length headers.
A performer RPM air gap intake would be good choice.
Put on a Holley 650 double pumper and you got yourself a killer street motor.
Goodluck, Cp
All kidding aside, you got a killer platform, 85 and up SBF's were roller cam blocks, so I'd definetly stay with a roller cam, but up the lift and duration a bit.
Ford Performance Parts # b303 is the cam alot of ford guys are running.
Roller rockers would be my next recommend along with some full length headers.
A performer RPM air gap intake would be good choice.
Put on a Holley 650 double pumper and you got yourself a killer street motor.
Goodluck, Cp
#9
Member
JUNIOR BUILDER
Thread Starter
Join Date: Jun 2009
Location: New Richmond, WI.
Posts: 87
![Default](images/icons/icon1.gif)
thanks for the info Cepx. thats all i need to get some idea rollin never built a motor without havin to go by the rule book let alone a ford. block is gettin sent out to machine shop soon(I HOPE) and ill go from there. thanks alot, nick