MSD DIGITAL 7 7530 T

Old 07-12-2010, 04:50 AM
  #1  
dynaguy03
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default MSD DIGITAL 7 7530 T

Hello All
I have a dragster with the digital 7.. i hooked up my computer and do not see where i can program it to activate my electric shifter.. Also .. is see most of the outputs can only handle 3amps.
So where do i program the MSD to shift 1 time at a certain RPM.??


Thanks In Advance
dynaguy03 is offline  
Old 07-12-2010, 05:23 AM
  #2  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Default

I have the same box, but I use the MSD monitor mounted in my truck. Here is the link to MSD so you can go to it and download the instruction sheet.
TheRabbit is offline  
Old 09-08-2010, 02:13 AM
  #3  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 231
Default

If you look on the list there is one that says timer switch, rpm switch. Choose which one you want it'll turn off the other one - sounds like the rpm switch, and set that for the revs you want.
chevyfireball is offline  
Old 09-12-2010, 02:15 PM
  #4  
I972Nova
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2007
Location: Orient, OH
Posts: 384
Default

I set mine to work off the yellow wire which is the shift light in the settings. You can feed the yellow wire to a relay then out to the shifter. The MSD box sends out a ground and the relay comverts it to positive.

Hope this helps...
I972Nova is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -