Big Shot 400 - How to activate
#11
Senior Member
MASTER BUILDER
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 231
Originally Posted by dparker
Originally Posted by chevyfireball
You shouldn't activate the nos unless you have wide open throttle or it could get ugly. And they say no more than 20 seconds. Go to the Holley website and you can download instructions for the Big Shot kit. Make sure your engine is built to handle nitrous and don't go giving it a shitload right away. Start small and increase the jetting gradually.
#12
20 Fast and Furious movie seconds.........................................
.................................................. ...............................................120 second quarter mile :roll: :roll: :roll: :roll:
.................................................. ...............................................120 second quarter mile :roll: :roll: :roll: :roll:
#14
Member
JUNIOR BUILDER
Join Date: Aug 2007
Location: Odessa Texas
Posts: 81
Originally Posted by dparker
Seriously jreiley don't run your 400hp nos more than 10 seconds where ever your at. I would recommend around 5 to 6 seconds right after you launch, sure will save alot of parts.
#15
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Originally Posted by onedragracer
Originally Posted by dparker
Seriously jreiley don't run your 400hp nos more than 10 seconds where ever your at. I would recommend around 5 to 6 seconds right after you launch, sure will save alot of parts.