problems with backfiring

Old 01-08-2008, 05:08 PM
  #11  
sterry571
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2005
Posts: 5
Default

Originally Posted by jmarksdragster
A big vacuum leak will do it. ops: I asked about the distributor because if you run an HEI make sure you get the low resistance center conductor for the cap. Make sure you have real good wires, MSD 8.5 or Accel 8.8 and keep your plug gap at or under .035. The Digital 7 lights a hefty fire. And no resistor plugs.
yeh i have a msd billet dist anbd im using moroso ultra 40 wires. the carb being loose seemed to be the fix. it crazy cuase the bolts were hand tight but to tighten didnt take but a turn and a half. i guess that just proves how much a air leak can cuase a lean condition
sterry571 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -