big block heads

Old 10-04-2007, 05:06 PM
  #1  
allstarmom
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2006
Location: north alabama
Posts: 8
Default big block heads

i have a set of heads can anyone tell me what they came from#3964290 and i found what looks like kl99 on them and gm9T I haven,t a clue.
allstarmom is offline  
Old 10-04-2007, 05:22 PM
  #2  
lookingaround
Senior Member
RACING JUNKIE
 
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
Default

try this site
http://www.mortec.com/castnum.htm
lookingaround is offline  
Old 10-04-2007, 05:25 PM
  #3  
lookingaround
Senior Member
RACING JUNKIE
 
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
Default

here is what i found on moretec
3964290....69-70...oval..CLOSED..396, 402, 427, 454, 101cc chamber
Large or small hex spark
plugs used
lookingaround is offline  
Old 10-05-2007, 03:54 AM
  #4  
allstarmom
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2006
Location: north alabama
Posts: 8
Default big block heads

thanks for the tip,i still want to find out what they came from,I,m cleaning out my husbands shop and I don,t want to make any mistakes.when i,m pricing anything.
allstarmom is offline  
Old 10-05-2007, 07:16 AM
  #5  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

Can you get us a picture of the combustion chambers?

If it is the head I think it is it has lots of street potential but little value becuase no one knows of the potential it has. If it is the other head I am thinking of it has also a low value but can work well in street applications with a little bit of piston work to clear the domes on the sides.

Ed
edvancedengines is offline  
Old 10-05-2007, 07:23 AM
  #6  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Hmm cleaning out the husband's shop huh, that's either a bad thing or a good one depends on the situation I guess.
Goodluck Charles
cepx111 is offline  
Old 10-05-2007, 09:40 AM
  #7  
allstarmom
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2006
Location: north alabama
Posts: 8
Default

its good before i sell another car or part i want to know what i have,i,ll get you a pic as soon as my daughter can come up.ya know how that goes.
allstarmom is offline  
Old 10-08-2007, 05:38 PM
  #8  
burgessdg
Junior Member
JOURNEYMAN
 
Join Date: Aug 2007
Posts: 25
Default heads

My casting # book says that head is a 1970 oval port used on the following engines, 402 - light truck, camaro, nova, chevelle, and full size, 454 - 390 hp corvette.

Dan
burgessdg is offline  
Old 10-14-2007, 10:10 PM
  #9  
davidstuff
Junior Member
SHOW GUEST
 
Join Date: Oct 2007
Posts: 1
Default Big Block Heads

Hi, I saw your posting on the heads, and I am looking for a set of these with these dates codes for a chevelle I am building right now. I would really appreciate your letting me know if you would be willing to sell them to me. I have another pair of them that are dated in April of 70, that I could trade you if you still need a pair. Please let me know if you would be willing to sell. Please email me if you are willing to discuss this, thanks [email protected] thanks david
davidstuff is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -