push rods ?
03-16-2008, 04:34 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jul 2004
Posts: 3
push rods ?
this is going to be a stupid question but I'm new at this so here it goes. I have a 406ci sbc. that now has a solid cam, My questoin is do I have to get new push rods for the solid cam or can I use the rods from my hydro cam. Thanks Mark.
03-16-2008, 07:02 PM
Senior Member
MASTER BUILDER
Join Date: Dec 2005
Location: berea,ky
Posts: 184
pushrods
The pushrods should be the same.
03-17-2008, 04:23 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jul 2004
Posts: 3
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off