Comp Test question
03-03-2008, 01:23 PM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Sep 2003
Posts: 105
Comp Test question
I check cly pressure on my motor today getting it ready for the blower. the motor is a 8 to 1 motor. it was 112-120 across the board and was built for lots of boost. this is low but is does this sound right.
03-03-2008, 09:26 PM
Member
JUNIOR BUILDER
Join Date: May 2007
Posts: 83
The most important thing is that they are even. If there where one cylinder with 80 or less, you would have a problem. That thing can take a lot of boost.
03-04-2008, 06:01 AM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Sep 2003
Posts: 105
Yes it was. It was surpose to get a really big turbo but I dont have time to finish that so I just ordered a blower so it could be done for this weekend for the pinks all out
03-17-2008, 12:04 PM
Junior Member
SHOW GUEST
Join Date: Feb 2007
Posts: 1
comp .test ?
what is the best way to check comp. on the motor and if i get a 175 or more reading those that meen i have high comp.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off