timing on alcohol?
#1
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Dec 2003
Posts: 25
timing on alcohol?
I have a 434 cubic inch small block with 15 to one compression. I run a rons flying toilet where is the best place to run the timing? Ive had some people tell me to retard and others have said to advance so could some one set my straight on this.
thank you
terry
thank you
terry
#3
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Dec 2003
Posts: 25
timing on alcohol
thank you for the reply also the engine is 800 hp I run 36 nozzles and usualy a 84 to a 90 pill been playing with timing about 32 degrees and my 66 nova at the end of the season on a cold track with worn slicks ran 9.04 car weighs 2640 with me in it and sixty foot about a 1.28 with 430 pro gears in the rear dana 60 and glide with a 180 straight cut gears does this sound about right? rear tires are 30-13-15 thanks for your input
terry
terry
#4
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
Re: timing on alcohol
Originally Posted by tschevelle
thank you for the reply also the engine is 800 hp I run 36 nozzles and usualy a 84 to a 90 pill been playing with timing about 32 degrees and my 66 nova at the end of the season on a cold track with worn slicks ran 9.04 car weighs 2640 with me in it and sixty foot about a 1.28 with 430 pro gears in the rear dana 60 and glide with a 180 straight cut gears does this sound about right? rear tires are 30-13-15 thanks for your input
terry
terry
Zip.