Turbo 350 trans,forward press in park reverse,123gears?
09-05-2009, 02:49 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 2
Turbo 350 trans,forward press in park reverse,123gears?
I just put a new converter in and replaced the shift shaft seal, to remove the seal i took out the shift linkage in the trans. My problem now is when i start the car it wants to move forward in Park, reverse, neutral, and natrually in all forward gears!! Could i have installed the shift linkage incorrectly. any help would be great, Thanks. :?:
09-05-2009, 04:56 PM
Senior Member
RACING JUNKIE
Join Date: Aug 2007
Posts: 1,523
Linkage
Sounds like the shift linkage needs adjustment.
09-06-2009, 05:40 AM
Member
MASTER JOURNEYMAN
Join Date: Oct 2004
Location: Hudson FL
Posts: 43
Sounds like the Manual Valve is not hooked up.
10-02-2009, 02:19 PM
Junior Member
APPRENTICE
Join Date: Mar 2006
Posts: 11
X2
If you drop the pan you will probably find the s link from the manual valve to the rooster comb (detent lever) not in place.
Rob
10-02-2009, 04:48 PM
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
Yes sounds like the clip from the manual linkage to the valve fell off, shaped like a S.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off