SBF 393 stroker
12-27-2011, 03:42 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Oct 2009
Posts: 1
SBF 393 stroker
I have a sbf 393 stroker with procomp 210 heads and 595 lift hyd. roller cam, flat top pistons 10:1 compression, single plane intake and quick fuel q750 carb. Would like more horse power, looking for a top end combanation, heads, cam, intake and carb. ect. any suggestions?
12-28-2011, 03:22 AM
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 496
12-28-2011, 12:35 PM
Senior Member
RACING JUNKIE
Join Date: Feb 2007
Location: Michigan
Posts: 1,900
Is this a street or strip engine? If it's strip I would raise the compression then a good port job if the heads are untouched. If it's street at least a good port job.
12-30-2011, 07:09 AM
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Call us, we can set you up with a top end kit that will pick up that engine combo.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off