Procharger Motor build up Help
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Mar 2003
Posts: 127
Procharger Motor build up Help
I want to build a Procharger motor, but this is for a 9.90/10.90 Car. .
I would like some input on the motor program.
I would like to build a 480-500 BBC
10-1 pistons
Alum Heads
Alcohol Mechanical Injection
20 psi Boost
I know that most of these motors are low compression gas carb or elec fuel injection.
Do I build the motor like our Blown SBC Top Dragster deal.
Alum Rods, 11.5-1 pistons
Or
Can I/Should I build it with good steel rods and a good crank
What do these guys with 565 BBC and 12-1500 HP have for internals?
I would like some input on the motor program.
I would like to build a 480-500 BBC
10-1 pistons
Alum Heads
Alcohol Mechanical Injection
20 psi Boost
I know that most of these motors are low compression gas carb or elec fuel injection.
Do I build the motor like our Blown SBC Top Dragster deal.
Alum Rods, 11.5-1 pistons
Or
Can I/Should I build it with good steel rods and a good crank
What do these guys with 565 BBC and 12-1500 HP have for internals?