Rims with screw holes

Thread Tools
 
Old 06-06-2020, 08:47 AM
  #1  
MoparThunder
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2014
Posts: 3
Default Rims with screw holes

I have an extra set of rims that I used slicks on, screwed in. Can I remove the slicks and screws and run M/T Pro Bracket drag radials with the holes open? Will it hold it's seal? I don't think you can screw in drag radials because of the belt.
MoparThunder is offline  
Old 06-07-2020, 06:40 AM
  #2  
BigBlockMark
Senior Member
MASTER BUILDER
 
Join Date: Mar 2014
Posts: 244
Default

If you try it and they leak, you can have the holes welded up easily.
BigBlockMark is offline  
Old 06-07-2020, 01:49 PM
  #3  
MoparThunder
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2014
Posts: 3
Default

Thanks BigBlockMark. I heard some people use a glue or sorts to keep the seal with drag radials..... true?
MoparThunder is offline  
Old 06-10-2020, 09:45 AM
  #4  
BigBlockMark
Senior Member
MASTER BUILDER
 
Join Date: Mar 2014
Posts: 244
Default

They do glue radials because you cannot screw them, but I don't know what they use. You could go to the "Yellow Bullet" Forum and ask there.
BigBlockMark is offline  
Old 11-15-2023, 08:10 AM
  #5  
FergusonnVict
Junior Member
SHOW GUEST
 
Join Date: Nov 2023
Posts: 4
Default

Originally Posted by BigBlockMark View Post
If you try it and they leak, you can have the holes welded up easily.
thanks i was looking for that

Last edited by FergusonnVict; 11-15-2023 at 08:47 AM.
FergusonnVict is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -