anybody ever stack two plates before?
08-24-2008, 08:14 PM
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2003
Location: columbus,ohio
Posts: 93
anybody ever stack two plates before?
I was thinking of putting another nitrous plate on top of the plate I already have on the car.Anybody ever try this?Thanks,Bill
08-25-2008, 04:17 AM
Senior Member
MASTER BUILDER
Join Date: Apr 2006
Location: Ms.
Posts: 191
I ran a double stack for several years on a BBF, just turn the spraybars on the bottom one long ways, and the top one sideways and let er eat.
08-25-2008, 06:59 AM
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
08-25-2008, 10:46 AM
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2003
Location: columbus,ohio
Posts: 93
10-02-2008, 10:34 PM
Senior Member
RACING JUNKIE
Join Date: Nov 2004
Location: St. Louis, Missouri
Posts: 661
I have had really good luch running a 1/2 " spacer between each plate but just as everyone else has indicated cris cross
you'll be fine
11-03-2008, 08:03 PM
Senior Member
RACING JUNKIE
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
I ran two plates last year no problems
11-06-2008, 06:37 AM
Senior Member
MASTER BUILDER
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Originally Posted by mopar1968
I ran two plates last year no problems
:lol: :lol: :lol: .....Plus it is a whole lot of FUN!!!!!
01-09-2009, 07:36 PM
Junior Member
APPRENTICE
Join Date: Sep 2007
Posts: 18
You will go lean on the front cylinders if you are not careful. At least cross the bars. I recommend a fooger much better distribution.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off