squirters
08-26-2009, 05:48 PM
#3
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
They can be hilicoiled, but i don't know what thread (dia)and pitch(threads per inch) they are. you will also have to use a good sealant, probably a high-temp RTV, but they can be fixed to save the carb body.
Zip.
Zip.
08-27-2009, 11:34 AM
#4
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Florida
Posts: 635
It is an odd size, a 12-24. If you are in a hurry you can get the heli-coil kit at www.blp.com
You can find them on ebay as well, just takes time. Might also find one at NAPA. And NO RTV. The gasket at the top and bottom of the squirter seal it, RTV will mess things up.
You can find them on ebay as well, just takes time. Might also find one at NAPA. And NO RTV. The gasket at the top and bottom of the squirter seal it, RTV will mess things up.
08-28-2009, 07:25 PM
#6
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Florida
Posts: 635
Originally Posted by oldandtired
Remember that this is a banjo type screw. The fuel has to be able to ride up the side of the screw to get out the squirter.
Dave
Dave
