what plugs and gap
04-09-2010, 07:46 AM
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Dec 2002
Location: spring creek nv.
Posts: 329
what plugs and gap
building a 540bbc blown alcohol engine
11.8 static comp.
731/726 lift roller //114 lobe center //running dur 322--326//dur at .050 284--288
brodix heads flowed to 372cfm on intake at 700 lift
12-71 blower 20%OD
big&ugly injector hat
port nozzles
110 pump
mallory supermag111
trans;;pg with brake
1;80 straight cut gears
10 disc high gear
4;30 gears
car estimated at 2800 lbs
32x14.5x15 slicks
what plugs and what should i gap them at to do my first start-up?
what hp do you think i'll be at?
11.8 static comp.
731/726 lift roller //114 lobe center //running dur 322--326//dur at .050 284--288
brodix heads flowed to 372cfm on intake at 700 lift
12-71 blower 20%OD
big&ugly injector hat
port nozzles
110 pump
mallory supermag111
trans;;pg with brake
1;80 straight cut gears
10 disc high gear
4;30 gears
car estimated at 2800 lbs
32x14.5x15 slicks
what plugs and what should i gap them at to do my first start-up?
what hp do you think i'll be at?
04-17-2010, 08:46 AM
#3
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Re: what plugs and gap
Originally Posted by hotrodharley
building a 540bbc blown alcohol engine
11.8 static comp.
731/726 lift roller //114 lobe center //running dur 322--326//dur at .050 284--288
brodix heads flowed to 372cfm on intake at 700 lift
12-71 blower 20%OD
big&ugly injector hat
port nozzles
110 pump
mallory supermag111
trans;;pg with brake
1;80 straight cut gears
10 disc high gear
4;30 gears
car estimated at 2800 lbs
32x14.5x15 slicks
what plugs and what should i gap them at to do my first start-up?
what hp do you think i'll be at?
11.8 static comp.
731/726 lift roller //114 lobe center //running dur 322--326//dur at .050 284--288
brodix heads flowed to 372cfm on intake at 700 lift
12-71 blower 20%OD
big&ugly injector hat
port nozzles
110 pump
mallory supermag111
trans;;pg with brake
1;80 straight cut gears
10 disc high gear
4;30 gears
car estimated at 2800 lbs
32x14.5x15 slicks
what plugs and what should i gap them at to do my first start-up?
what hp do you think i'll be at?
Later '
G 8)
