crower solid roller lifters

Old 02-01-2012, 03:22 AM
  #1  
N2Dirt
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Sep 2003
Location: Wichita, KS
Posts: 19
Default crower solid roller lifters

Can crower lifters be rebuilt? I've found a couple that the wheel is catching in a couple spots. I'd hate to trash them if i didnt have to. I looked on crower's site but they didnt say anything about being able to rebuild them.

I believe they are P/N 66200

I guess worse case is i just buy two pair.
N2Dirt is offline  
Old 02-01-2012, 05:40 AM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Most of the crowers are rebuildable, call them
hammertime is offline  
Old 02-02-2012, 07:42 AM
  #3  
desoto30
Member
JUNIOR BUILDER
 
Join Date: Feb 2008
Location: Childers Australia
Posts: 98
Default

.904s are & .842s are not
desoto30 is offline  
Old 02-03-2012, 10:18 AM
  #4  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

THAT hanging spot might be a missing roller bearing or 2,check your oil filter to be safe!I had a set of comp solid roller lifters do that and found 3 bearings in my oil filter and 5 in the oil pan!Called comp and they told me that u r supposed to rebuild them every year, mine were 3 years old.I switched to gs lifters and was told to replace or rebuild after 200-300 runs.
JEFF69Z28 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -