63 VW "Bug"...on STERIODS
#1
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
63 VW "Bug"...on STERIODS
Hey Avery and Spib........
i found this pic of the Bug ..it was a weekend run a few yrs back...th big was a hoot..i forgot about this pic..ran across this tonight...though you would enjoy..
[img][/img]
i found this pic of the Bug ..it was a weekend run a few yrs back...th big was a hoot..i forgot about this pic..ran across this tonight...though you would enjoy..
[img][/img]
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#5
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
406 aluminum rod motor ...5.92 to 6.0's on motor...5.60's on spray (150 shot)..i ran it on motor most of the time...i sprayed it at a NMCA match race in ATLANTA in 2003 when i ran the 1st and only 1/4 mile......it was harry on Big end...
thanks- Brian
thanks- Brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#7
Administrator
RACING JUNKIE
Thread Starter
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
2475lb with 215lb driver..it was all steel,all glass, 2x3 frame rail....had the heavy brake calipers and rotors..
i had Jeff Hammner of Tuscolousa Alambama build the motor..didnl;t jave much for heads..World heads..bowl blended..nothing much....
made 612hp natural aspirtated...motor could have been a lot more with a good set of 23 degree aluminum heads
i had Jeff Hammner of Tuscolousa Alambama build the motor..didnl;t jave much for heads..World heads..bowl blended..nothing much....
made 612hp natural aspirtated...motor could have been a lot more with a good set of 23 degree aluminum heads
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "