Dumb Question-
04-10-2009, 04:02 PM
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,391
Dumb Question-
I have a TH350 on BBC. It is manual valve body w/ stall & shift kit. All is well... works fine.
My question: It has a modulator on the trans, but NO vac. hose on the modulator... where there is a hose connection on the modulator it is bare (you can see the adj screw) but it is not plugged. Why??? Do I need it? Why is it there if it is not hooked up? etc... Thanks/all. Scooter
04-10-2009, 05:02 PM
Senior Member
RACING JUNKIE
Join Date: Feb 2007
Location: Michigan
Posts: 1,900
Hey Scooter, since you have a manual valve body and you shift it manually you don't need a vacuum supply to the modulator. Hope that helps.
04-10-2009, 05:03 PM
Senior Member
RACING JUNKIE
Join Date: Aug 2007
Posts: 1,523
Modulator
I think it is probably there just to keep the tranny fluid on the inside. Don't need it with a manual valve body.
04-11-2009, 03:29 AM
Member
MASTER JOURNEYMAN
Join Date: Oct 2008
Location: Desoto, MO
Posts: 37
Does anyone make a modulator block-off to eliminate it?
04-11-2009, 06:31 AM
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Plug
Yes,All of your Trans Parts Manufactures make an Alu.Plug that Goes in Place of the Modulator!
later
G 8)
05-11-2009, 01:10 PM
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,391
I forgot I made this post... thanks for everyone who replied. Scooter
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off