CARBURETOR WEDGE
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2006
Posts: 68
CARBURETOR WEDGE
What do you guys think about taking a phenolic carb spacer and milling an angle on it to make the carburetor sit level.Will it mess with any tuning or the way it runs,and should the carb be perfectly level? Thanks
#2
Senior Member
MASTER BUILDER
Join Date: Nov 2004
Location: Port Sulphur, La.
Posts: 139
wedges
I dont know about a dominator wedge, but it was common. and in most cases necessary down here to run all kind of wedges on the gas motors because of the angle the way they sat in the trawl boats. Try a marine supply, should have them in an assortment of thicknesses. Good Luck.