which tranny??????????

Old 02-24-2008, 08:48 PM
  #1  
mwestchevy
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jan 2008
Location: decatur, il.
Posts: 14
Default which tranny??????????

first off - very nice site!! this is my first time posting. my question is : which trans to put in my 1972 camaro drag car? this will be my 1st time racing & i need some input. the car is for drag only, fiberglass front & lexan windows. it has a 5.13 gear with 31-13.0 tires. i will be running a small block 383 with approx. 450 h.p. for now!! i would like to run a glide w/brake but i have a t-350 that was built to hanlde 500 h.p. it is currently in my 1966 big block chevelle, i will be pulling out & installing a 700r4. i will mainly be running the 1/8th but i would also like to run the 1/4 on occasion, any recomendations????????? thanks, brian / illinois
mwestchevy is offline  
Old 02-25-2008, 02:20 AM
  #2  
us7race
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

The Th350 will do fine for now but your gear may be too much with a 3-speed trans.. The glide would work good with them..
us7race is offline  
Old 02-25-2008, 03:25 AM
  #3  
Mikeykee4221
Junior Member
SHOW GUEST
 
Join Date: Mar 2004
Location: Italy, Tx.
Posts: 4
Default What trans.

Run the turbo 350, have some fun, and when you're through playing, put a glide in it and go racin'.
Mikeykee4221 is offline  
Old 02-25-2008, 02:38 PM
  #4  
mwestchevy
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jan 2008
Location: decatur, il.
Posts: 14
Default

thanks for the info! i think i'll just leave the th350 in the chevelle and get a glide for the drag car. if i try to run the 1/4 am i going to run out of top end with these gears?
mwestchevy is offline  
Old 02-25-2008, 04:18 PM
  #5  
us7race
Senior Member
EXPERT BUILDER
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

No doubt. For a 1/4 mile car that is ALOT of Gear. JMO
us7race is offline  
Old 02-25-2008, 08:52 PM
  #6  
sds10racer
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default

run the 700r4 and these gears and it prob. will work. would pull hard all the way thru the 1/4 mile.i'm running 4.86 gears w/ 31-10.50w tires and go thru the traps at 6800. about the same hp w/ th350 in a s10.
sds10racer is offline  
Old 02-25-2008, 08:57 PM
  #7  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

A glide is the best for what you want to do, your car will ET well but run out of engine in the 1/4. Depending on weight, a 4.56 + or -.
jmarksdragster is offline  
Old 02-29-2008, 07:59 PM
  #8  
mwestchevy
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jan 2008
Location: decatur, il.
Posts: 14
Default

i,m going to put the glide in it. i will probably be on the 1/8th 90% of the time anyway!! if i try the 1/4 i will probably just change the gears and see what happens. thanks, brian
mwestchevy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -