CANFIELD #23600 SBC HEADS

Old 02-25-2008, 06:39 PM
  #11  
harleym
Junior Member
APPRENTICE
 
Join Date: Jan 2006
Posts: 13
Default

Both are in 7000# + mud trucks. One truck has 50" tractor tires and the other has 44" boggers. They pull very good to 7800 rpm. I should of mentioned, it takes atleast 1.875 header tube to cover the exhaust port. I had a 406 very simular to these two with B T1 (drag s10) and the canfield makes more power.
harleym is offline  
Old 02-29-2008, 05:54 PM
  #12  
nova72990
Junior Member
SHOW GUEST
 
Join Date: Mar 2005
Posts: 1
Default canfield 23600

i ran these heads on a 406 and a super victor the heads and intake where both ported w/13.1 comp powerglide 4.88 gears 32" tires in a nova that weighed 3000 with me best et was 9.87 w/1.30 60'. the only problem i have with these heads is if you have a lot of lift this offset will wear roller tip into alum. rocker body any you will need to replace intake rockers about every 300 or so runs,i need a shaft system is what canfield said for that much lift. my lift was 739 bobs is 728 both from cammotion. check out profile ( bobtemplin ) its a 406 i built with these heads it weight is also about 3000'- best et was 9.98 best 60' was 1.30 with t/350 trans my profile is ( nova72990 ) look at gallery my old blue nova with the 406
nova72990 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -