Rear end problems
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Aug 2006
Posts: 1
Rear end problems
I have a 35 spline full floater 9", does anyone know if there is axles, centre and gears that will withstand a 2800lb Promod with a 2700hp KB, lenco drive?
I am avoiding having to go with a complete new deal.
Can anyone who knows please respond.
Warren
I am avoiding having to go with a complete new deal.
Can anyone who knows please respond.
Warren
#3
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Floater
If its a Full Floater,thats what we use in the Funnies and Fuel Altereds.They do Not weigh that much,but HP is there!EWhat Componente do you Have?
If you NEED any thing?
Call Danny Miller @ Rear Gears 636 861 3900
Later
Greg 8)
If you NEED any thing?
Call Danny Miller @ Rear Gears 636 861 3900
Later
Greg 8)
#5
Senior Member
EXPERT BUILDER
Join Date: Dec 2006
Posts: 272
Hi Warren,
not sure I understand what you are asking... do you have just a housing or is it complete?
2800lbs at 2700 hp, you definatly need the good stuff. The rear end is were all the abuse happens to go through, it needs to be tuff. Not the place to save a couple of bucks in a car like that...
ed
not sure I understand what you are asking... do you have just a housing or is it complete?
2800lbs at 2700 hp, you definatly need the good stuff. The rear end is were all the abuse happens to go through, it needs to be tuff. Not the place to save a couple of bucks in a car like that...
ed