Cam, Springs and Torque Converter. What Should Buy??
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Oct 2008
Posts: 16
Cam, Springs and Torque Converter. What Should Buy??
I have a 98 Camaro with a chevrolet 383 w/ a Holley Double Pumper Carb. , Flat Top pistons with 6 in. rods and a set of 291 Heads and a 373 rear-end. This is a drag car project. I will be racing a 1/4 mile with this car.
I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.
Thanks for the help,
Dillon Miller
I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.
Thanks for the help,
Dillon Miller
#2
Senior Member
MASTER BUILDER
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Re: Cam, Springs and Torque Converter. What Should Buy??
Originally Posted by MillerTime12
I have a 98 Camaro with a chevrolet 383 w/ a Holley Double Pumper Carb. , Flat Top pistons with 6 in. rods and a set of 291 Heads and a 373 rear-end. This is a drag car project. I will be racing a 1/4 mile with this car.
I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.
Thanks for the help,
Dillon Miller
I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.
Thanks for the help,
Dillon Miller
#3
Senior Member
EXPERT BUILDER
Join Date: Jan 2005
Posts: 336
YOU BOUGHT CAM ALREADY?YOU SAID ON A DIFFRENT SECTION YOU SELECTED A 3800-7200 CAM?
IF I WAS YOU ID GO WITH EITHER COMP CAMS EXTREME LINE OR VODOO CAM BY LUNATI. YOU SAID YOUR ON A BUDGET THOSE ARE MY TOP 2!!!'
IF I WAS YOU ID GO WITH EITHER COMP CAMS EXTREME LINE OR VODOO CAM BY LUNATI. YOU SAID YOUR ON A BUDGET THOSE ARE MY TOP 2!!!'