cooling 400 cu in SBC
09-20-2009, 10:44 AM
#11
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Yeah, they put water into the heads between the center two cylinders. Reason being is those two run so darn hot on a SBC...
It helps prevent detonation on those cylinders. It's common practice on roundy round stuff.
Doesn't really do too much though for over all cooling.
It helps prevent detonation on those cylinders. It's common practice on roundy round stuff.
Doesn't really do too much though for over all cooling.
09-20-2009, 06:20 PM
#12
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Mar 2008
Posts: 173
cooling 400 sbc
thanks guys i will just use the best of everything (rads, fans, water pumps etc and just have faith in all this good equiptment to do a good jobkeeping me cool thanks again guys for all your input chevy art PS what should i do for a radiator cap. i am using a good ron davis aluminum radiator 26x19 2 inches thick, mechanical fan with an aluminum shroud, good miledon water pump and HP thermostat, but i dont understand anything about radiator caps and usage of an overflow bottle. any suggestions would be appreciated about this chevy art
