offset pinion
12-19-2007, 12:42 PM
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
offset pinion
I can get a 9" housing from a buddy of mine for free.It is already narrowed and is the exact size I need.Pure luck.The thing is,it has a centered hogs head,which puts the pinion off to one side about 1-1.5".I was wondering what this would hurt,if anything.I'm concerned about u-joints busting,but mainly scared of snapping a tailshaft housing.What do ya'll think about aluminum center sections.I'm a Chevy guy lost in Ford's world of wierdness.HELP ME :?[img][/img]
12-19-2007, 01:53 PM
#2
Senior Member
MASTER BUILDER
Join Date: Oct 2004
Location: Newport News, VA
Posts: 139
Since you have basically the same post in the chassis section I am going to lock this one and ask that responders go to the chassis section. No need to crosspost in different sections.
George
George
