stacks stumble

Old 11-11-2009, 06:57 AM
  #11  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by qiksix
Yeh pretty sure it was Don i emailed. The idle bypass the poppet from the rear of barrel valve, yes it's at 10psi. You mention to keep the idle lean but doesn't that hurt throttle responce, i thought it had to be fairly rich for the transition from idle to flat chat.
Once you roll the throttle 15/20% it cut's off the idle bypass and goes to full fuel pressure and back to rich mode. So even if you're foot braking the car rather than a trans brake you off the lean setting for idle.

Suicidebomb, the -1/2 pump puts out about 4.7 GPM at 4,000 RPM's

Zip.
zipper06 is offline  
Old 11-11-2009, 08:57 AM
  #12  
suicidebomb
Senior Member
RACING JUNKIE
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

Thanks zip
suicidebomb is offline  
Old 11-11-2009, 09:08 AM
  #13  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by suicidebomb
Thanks zip
Actually i guess i was off a little, here are the flow rates for all the pumps.

Zip.

http://www.goodvibesracing.com/searc...fuel+pump+flow
zipper06 is offline  
Old 11-11-2009, 09:13 AM
  #14  
suicidebomb
Senior Member
RACING JUNKIE
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

Thanks again zip.
suicidebomb is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -