RECOMMEND A HEAD FOR A 434 SBC 15 OR 18 DEGREE HEAD
10-28-2012, 05:24 PM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Apr 2006
Posts: 103
18c
wow that's what my car runs but at 2440#! i checked T&D web site and my rockers are the wrong offset for the 18c, i saw a set on ebay will check to see if they have shaft rockers, Zip i do have to change pistons, on brodix web they show a dyno comparing a ported t1 and a ported sts18x and it was about 100 hp better!
10-30-2012, 06:11 PM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Apr 2006
Posts: 103
GM 18 degree
Zip a guy has a set of GM #363 18 degree heads with T&D shaft rockers he wants to trade for my 23 degree heads, are they any good? thanks Doug
11-04-2012, 03:22 AM
Member
MASTER JOURNEYMAN
Join Date: Sep 2007
Posts: 40
Check CFE racing products....they have 18, 15, 12 and 10 degree heads. Check the flow #'s. I'm using a set of the 18 degree heads, and they work well.
11-04-2012, 02:20 PM
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Apr 2006
Posts: 103
CFE
Wow I never looked at CFE but they are very nice heads that do flow, thanks for the info. Doug
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off