valve cover gaskets where push out
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2003
Posts: 1
valve cover gaskets where push out
first test run with are new car and motor...and it push out gaskets we have a 565ci motor with a vacum pump its showing about 9# of vacum motor was dynoed all good then way is pushing valve cover gaskets the gaskets were the cork ones thanks for the help
#2
Get rid of the cork gaskets and get the rubber ones with the metal insert and dowels around the bolt holes, can't over tighten them.
Is this a new vacuum pump? Have you cleaned it and lubed it lately?
Is it pushing the gaskets out or sucking them in?
Is this a new vacuum pump? Have you cleaned it and lubed it lately?
Is it pushing the gaskets out or sucking them in?