ladder bar ?
#11
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
slicks are new hoosiers,thanks guys i'll try that bill ,i have the bars in the bottom hole now.i put the shocks down to # 4 and 60's came back but still unloading the tires just before the 60.i'm taken the family out of town this weekend but the week after going to a big race at a great track so i'll be able to tell u guys what happens then.thanks alot guys i need the help cause i'm lost & frustraded with the car,i want to go fast but i want to do it consistently.
#12
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
hey bill just seen your from ky are you going to clay city in two weeks? if you are like to meet you, i have the 78 malibu painted like a 56 chevy can't miss it. and thanks again.
#13
Senior Member
MASTER BUILDER
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
I might be out of town that weekend, but if that doesn't happen I was going to be there to watch. I go to Clay City quite often to watch as I still haven't gotten my car out of moth balls. I don't remember seeing your car, but I will look for you.
Later,
Bill
Later,
Bill
#14
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
moving the bars up a hole seems to have worked after some shock & tire pressure adjustment,the car picks the tires up about 6"to8" carries them about 30 to 40' with no spinning ( track was great ).here is my runs on sunday once i got it right 11:30am 60' 1.353,330' 3.896, 1/8 6.092 @110.292, 4:06pm 60'1.358,330'3.903, 1/8 [email protected] on the break alittle.6:34pm 60'1.360,330'3.909,1/8 [email protected] that you guys helped me get that straight it cause the fuel pressure to start dropping after the 330' mark and the car nosed over ( at least it nosed over consistly :lol: ).thanks guys for all your help & bill maybe we'll get to meet next time i'm down in your neck of the woods :wink: .